This timber log cabin kit is 12’ wide solid wood wall engineered cabin with a 6/12 pitch roof and 2×4 rafters. Each log has a double tongue & groove milled on the top & bottom kiln dried to 10-12% moisture content. The outside surface is milled round like a log and the inside surface is milled to a knotty pine paneling. When the panels are assembled, expandable foam is sprayed between the tongues of each log to seal out the weather. The pre-assembled roof panels give the charm and elegant appearance of the open beam cathedral ceiling with select knotty pine decking. If the building needs to be moved after construction it is easy to do by removing the screws and disassembling it. The panels may be fastened together and reassembled after being moved to a new location!